Start With Your Case, Not Your Bike
The IntraLock system is a mechanical mounting standard, and the two products here solve the same problem from opposite ends. The IntraLock Bike Mount is a complete handlebar mount designed for Mous Evolution cases. The Universal IntraLock Convertor adds the IntraLock mechanism to a case you already own, provided that case has the right surface.
That split matters because the mount and the convertor are not interchangeable add-ons. The bike mount expects an Evolution case with the matching cut-outs. The convertor expects a smooth, non-porous, flat-backed case such as aramid fibre or hard plastic. If your case is leather, silicone, fabric or wood, the convertor's adhesive is not supported by the supplied information.
What the Bike Mount Includes
- IntraLock® Bike Mount: Designed for use with Mous's Evolution cases; IntraLock mechanical mounting works with the case's corresponding cut-outs. This is the first compatibility check. If you do not use an Evolution case, the bike mount alone will not hold your phone.

IntraLock® Bike Mount - IntraLock® Bike Mount: Fits bicycle handlebars of diameters 35.6, 31.8, 25.4 and 22.2mm, with a 31.8mm spacer assembled and 25.4mm and 22.2mm spacers included. These are the common handlebar sizes the mount is built to fit. Check your bar diameter before ordering; the bracket itself is 35.6mm.
- IntraLock® Bike Mount: Comes with a thumbscrew for secure but temporary attachment and a hex bolt for a more permanent fit. The choice affects how quickly you can move the mount between bikes versus how fixed you want it to stay.
When the Universal Convertor Makes Sense
The Universal IntraLock Convertor is for riders who already have a phone or case they like and want to use IntraLock accessories without switching to an Evolution case. It is a 58mm x 58mm x 2.5mm adapter that adheres to the back of a compatible case and adds the IntraLock connection.
The trade-offs are specific. The convertor is designed for one-time installation, so repositioning it is not supported. It is not compatible with wireless charging. It should not be installed directly onto your phone, and it is not intended for tablets or larger devices. Those limits are worth weighing before you buy, especially if wireless charging is part of your daily routine.
Convertor Compatibility and Installation Limits
- Universal IntraLock® Convertor: Adhesive works with smooth, non-porous, flat-backed cases such as aramid fibre and hard plastics; not with soft, porous or rubbery surfaces including wood, fabric, leather and silicone. This is the make-or-break surface check. A leather or silicone case is not a supported pairing, regardless of how well it fits your phone.

Universal IntraLock® Convertor - Universal IntraLock® Convertor: Designed for one-time installation; do not re-install. Removal guidance says to slide a fingernail or card under the edge and lift gently, warming with a hairdryer on its lowest setting if needed. You get one careful placement. Plan the position before you peel and stick.
- Universal IntraLock® Convertor: Not compatible with wireless charging and not for use with tablets or larger devices. If you rely on wireless charging, the convertor changes that habit; if you wanted one adapter for a phone and a tablet, this is not it.
Bike Mount vs Convertor: The Decision Points
- Case you already own: Bike Mount: requires a Mous Evolution case. Convertor: requires a smooth, non-porous, flat-backed case such as aramid fibre or hard plastic.
- Handlebar fit: Bike Mount: built for 35.6, 31.8, 25.4 and 22.2mm handlebars with supplied spacers. Convertor: no handlebar interface of its own; it pairs with IntraLock accessories.
- Attachment style: Bike Mount: thumbscrew for temporary attachment or hex bolt for a more permanent fit. Convertor: one-time adhesive installation.
- Wireless charging: Bike Mount record does not describe wireless charging behaviour. Convertor: explicitly not compatible with wireless charging.
- Phone or device limits: Bike Mount: designed around Evolution cases. Convertor: do not install directly onto your phone; not for tablets or larger devices.
What the Mount Does and Does Not Do
The bike mount is described as waterproof, but that applies to the mount itself, not to your phone. It does not provide extra waterproofing for the device. The magnets inside are part of the IntraLock alignment mechanism and are not strong enough to hold the phone on their own; the mechanical connection does the holding.
The supplied record does not include step-by-step fitting instructions or a stated load rating. Treat handlebar diameter and case compatibility as the confirmed constraints, and follow the included hardware rather than improvising.
A Simple Way to Choose
- Choose the IntraLock Bike Mount if: You use a Mous Evolution case and want a dedicated handlebar mount with spacer options for common bar sizes and a choice of temporary or more permanent fixing.
- Choose the Universal IntraLock Convertor if: You have a smooth, hard-backed case you want to keep, you do not need wireless charging through that case, and you are ready for a one-time adhesive install.
- Reconsider both if: Your case is leather, silicone, fabric or wood, or you need wireless charging to keep working. In those cases the supplied compatibility information does not support the convertor route.


